Timeless: The Impreza is a proper drivers car with a manual transmission, all wheel drive, and minimal computer controls. These were simpler times, but simpler times also came with simple headlights, and that's one of the modern amenities that's simply hard to live without, especially when the original lenses are now starting to haze and it's dark outside! At Morimoto, we get it, and that's why our new Impreza WRX and STi Bi-LED headlights are about as future-proof as the car itself!
Time for a Facelift: The design of our Impreza XB LED headlights was inspired by the headlights found on the WRX concept car. The internal Daytime Running Light is fitting to the overall design of the front end and does a great job modernizing the car without standing out as an aftermarket part. The LED DRL is powered by 5000K LEDs and is insanely bright, easily visible during the day. The DRL will also dim down when the parking lights or low beams are on for compliance reasons. The inner optics act as a very-visible sequential LED turn signal too.
Bi-LED: The Morimoto XB LED headlights for the 08-14 Subaru Impreza come standard with a single high-output Bi-LED projector. Thanks to their uniquely shaped projector lenses paired with modern optics within, they're going to perform even better than they look. The full LED low and high beam are an instant upgrade over stock, with a wider, brighter low beam, and a high beam that will penetrate far into the distance with ease. To top it all off, these optics meet & exceed all SAE, DOT standards when aimed properly, which is easy to do with their integrated aiming adjusters.
PLUG-N-PLAY: As for wiring, Morimoto's LED headlights are designed to work on your Subie without any modifications. They are compatible with all versions of the WRX and WRX STi from 2008-2014. All wiring and adapters are included with the headlights.
WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your car's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light.